
Dimethyl Toluene Diamine(DETDA) As high quality Curing Agent
Dimethyl toluene diamine(DETDA) as curing agent DETDA is a very effective polyurethane elastomer chain expansion agent, especially for the RIM (reaction injection molding) and SPUA (spray polyurea elastomer); also can be used as polyurethane elastomer and epoxy resin aromatic diamine curing...
Product Details
Dimethyl toluene diamine(DETDA) as high quality curing agent
DETDA is a very effective polyurethane elastomer chain expansion agent, especially for the RIM (reaction injection molding) and SPUA (spray polyurea elastomer); also can be used as polyurethane elastomer and epoxy resin aromatic diamine curing agent, used for casting, coating, RIM and adhesive, but also is a polyurethane and polyurea elastomer chain extension agent.
1. Physical and chemical properties:
Light yellow to amber transparent liquid, slightly soluble in water, soluble in alcohol, ether, ketone and other polar organic solvents, with polyether, polyester polyol compatibility is good.
Property | Result |
Molecular formula | C11H18N2 |
Structural formula |
|
Molecular weight | 178.28 |
Melting point/ freezing point °C | -9 |
Initial boiling point °C | 308 (1013 hPa) |
Self-ignition temperature °C | 420 (1013 hPa) |
Relative density g/cm3 at 25 °C | 1.02 |
Flash point °C | 135 |
Vapour pressure | 0.000971 Pa (25°C) 0.00391 Pa (35°C) |
Isocyanate equivalent | 89.5 |
Ethoxyline resin equivalent | 44.3 |
1. Standard value:
Property | Result |
Viscosity(20°C) | 280 |
Viscosity(25°C) | 155 |
Diethyltoluenediamine | ≥ 98% (Q/370781YXHG001-2015) |
2,4-isomer | 75.0 - 81.0% |
2,6-isomer | 18.0 - 20.0% |
Other alkyl amine | 0.5 - 3.0% |
Amine value (mg KOH/g) | 615 - 635 |
TDA Assay | ≤ 0.1% |
Water content | ≤ 0.1% |
DETDA is a type of aromatic diamine, ethyl and methyl groups, which makes the activity of is much lower than that of TDA. The reaction rate with polyurethane prepolymer several times faster than DMTDA, about 30 times faster than MOCA. Mainly used in RIM polyurethane system and spray polyurethane (polyurea) elastomer coating system, with a fast reaction rate, short release time, high initial strength, product resistance to hydrolysis, heat and so on. In addition to the product can also be used as elastomer, lubricants and industrial oil antioxidant, and chemical intermediates.
1. Packaging and transport:
Packaging for 1000KG/IBC barrels, 200kg drums or ISOTANK, the special packaging in accordance with the requirements of customers.
2. Storage:
Stacked in a cool/ dry/ ventilated place, keep away from heat/ fire, to prevent the direct sunlight, to avoid high temperature, do not sharp object collision damage.
1.Q: Are you a factory or trading company?
A: We are a manufacturer based exporter focused in Chemicals.The factory investment to register our trading company to service the world customers, Our company have some investments among manufacturers as well.
2.Q: Where are you located? What’s your shipping port?
A: We are located in Dongying, Shandong Province, East of China, 2 hours high train from Qingdao.
Usually ship from Shanghai or Qingdao, or depends
3.Q: What is the payment terms?
A: 30 % advanced & balanced upon BL copy. Or L/C at sight , T/T, D/P, D/A , or for good status honest customers, we can deliver goods first then collect money.
4.Q: How can I get some samples?
A: Sample available upon request, small sample free of charge maybe you need pay for airmail fee. For approved sincere good customers we can also applying to send sample with airmail fee our side…..
- <
- Previous: Dimethyl Toluene Diamine(curing Agent)
- Next: Polyurea Elastomer Coatings For Pickup Truck
- >