
Spray Polyurea For Swimming Pool
Discription: Polyurea elastomer is a two-component, without solvent, a new type of waterproof and anti-corrosive coatings, the rapid response of site construction, spraying technology is a kind of newest coating technology of the 21st century. Sewage water treatment pool as an important link in...
Product Details
Spray Polyurea for swimming pool
Discription
Swimmig Pool Polyurea elastomer is a two-component, without solvent, a new type of waterproof and anti-corrosive coatings, the rapid response of site construction, spraying technology is a kind of newest coating technology of the 21st century.
The coating system consists of amine-terminated resin, arylamine chain extender and MDI prepolymer. The product is dual-component, self-cured and thick coating anti-corrosion material.
Product Characteristics
Product Characteristics | |||||||
Solid Content | 100% | Volume Mixing Ratio | A:B = 1:1 | ||||
Viscosity (25℃) | ≤1000mPa.s | Shelf Life | 1 year | ||||
Density (25℃) | A: 1.080-1.160 g/cm3 B: 1.030-1.100 g/cm3 | ||||||
Curing Characteristics | |||||||
Gelation Time | 10-20 seconds | Curing Time | 6 hours | ||||
Touch Drying Time | 60-120 seconds | Maximum Strength | 4 days | ||||
Physical Properties | |||||||
Tensile Strength | 22MPa | Tearing Strength | 60KN/m | ||||
Elongation | 40% | Hardness | 60-70D | ||||
Flame Retardance | Self-distinguish in high fire |
* Drying time is temperature, humidity, and film thickness dependent.
* Coating equipment status determines the property of coating.
* A test sample is cured in a thermostat of 65-70℃ for 24 hours.
Advantages
High reactivity, fast curing, no flow
The coating is tight and has strong adhesion to the base
The corrosion properties of acid-base smoke and other media are stable
Packing
Part A: 220kilogram per drums.
Part B: 200 kilogram per drums. (Custom package available at additional charge)
One set:420 kilogram totally
Storage
(1).The A component is affected by moisture and must be protected from moisture contamination. Containers are factory sealed with an inert gas to prevent contamination. Keep all containers tightly closed during storage. For further storage after opening, containers must be purged with nitrogen gas or dry air and tightly sealed to protect from moisture contamination.
(2).Store drums and pails in a cold, dry and ventilated location between 15 ℃ and 40 ℃.
(3).Twelve months in sealed unopened containers.
(4).Keep away from fire and heat source.
(5).Keep away from rain and sun.
Shipping
10 days upon receipt of payment by shipment on Shanghai/ Qingdao Port.
- <
- Previous: Polyurea Anticorrosion For Loudspeaker
- Next: Polyurea Paints
- >