
Hand Brush Polyurea Coating
Product Description spray polyurea elastomer protection coating/A and B Polyurea HT-100 2A Elastomer Waterproofing Material Production Description The coating system consists of amine-terminated polyether resin, amine chain extender and MDI prepolymer, belongs to spraying quick cured polyurea...
Product Details
Product Description
Hand brush polyurea elastomer protection coating/A and B
Polyurea HT-1002A
Elastomer Waterproofing Material
Production Description
The coating system consists of amine-terminated polyether resin, amine chain extender and MDI prepolymer, belongs to spraying quick cured polyurea and has dense and tough coatings and high elasticity and high strength.
Product Characteristic &Physical Properties
Product Characteristic | |||||||||||
Solid Content | 100% | Volume Mixing Ratio | A:B = 1:1 | ||||||||
Viscosity (25℃) | ≤1000mPa.s | Shelf Life | 1 year | ||||||||
Density (25℃)
| A: 1.080-1.160 g/cm3 B: 1.030-1.100 g/cm3 | Theoretical Coating Amount | 1.05-1.10kg/m2 (Dry Film: 1mm Thickness) | ||||||||
Curing Characteristics | |||||||||||
Gelation Time | 10-60 seconds | Curing Time | 24 hours | ||||||||
Touch Drying Time | 60-150 seconds | Maximum Strength | 7 days | ||||||||
Physical Properties | |||||||||||
Tensile Strength | ≥10MPa | Tearing Strength | 55KN/m | ||||||||
Elongation | ≥300% | Service Temperature | -30℃-120℃ | ||||||||
Hardness | 80-90A | Weather Resistance | Keep effective for 30000 hours in QUV |
* It needs seven days for the polyurea coating to be completely aggregated and reach final strength.(Drying time is temperature, humidity, and film thickness dependent.)
* Coating equipment status determines the property of coating.
* A test sample is cured in a thermostat of 65-70℃ for 24 hours.
Package&Shipment
Packaging:
Part A: 220kilogram per drums.
Part B: 200 kilogram per drums. (Custom package available at additional charge)
One set:420 kilogram totally
Storage:
(1).The A component is affected by moisture and must be protected from moisture contamination. Containers are factory sealed with an inert gas to prevent contamination. Keep all containers tightly closed during storage. For further storage after opening, containers must be purged with nitrogen gas or dry air and tightly sealed to protect from moisture contamination.
(2).Store drums and pails in a cold, dry and ventilated location between 15 ℃ and 40 ℃.
(3).Twelve months in sealed unopened containers.
(4).Keep away from fire and heat source.
(5).Keep away from rain and sun.
Our Customers
Based on the high requirements for quality over twenty years,we have established long-term mutually beneficial business relationships with all of our customers in the past decades.And we have exported to all over the world.,especially South Korea,Japan,Vietnam,Malaysia,U.S.A.,Canada,Mexico,etc.
Company Information
Recommended Usage
Applied to waterproofing of industrial plants, large building roofs, cold storage moistureproof coating, dam, bridge, underground engineering, sewage treatment facility, natatorium and power station.
FAQ
1.Q: Are you a factory or trading company?
A: We are a factory.
2.Q: Where are you located? What’s your shipping port?
A: We are located in Dongying City, Shandong Province, North of China.We usually ship from Shanghai ,Qingdao and Yantai Port.
3.Q: What is the payment terms?
A: 30 % advanced & balanced upon BL copy. Or L/C at sight , T/T or for good status honest customers, we can deliver goods first then collect money.
4.Q: How can I get some samples?
A: Sample available upon request, small sample free of charge maybe you need pay for airmail fee. For approved sincere good customers,we can also apply to send sample with airmail fee on our side.
Contact us
- <
- Previous: Wear-resistant Anti-corrosion Polyurea For Floor
- Next: Polyurea Coating Based On Steel Material
- >